USB Joystick Plug & Play compatibility with Microsoft’s Xbox Adaptive Controller. Features 8 assignable game buttons (re-configurable via Microsoft's XBOX Accessories app) and multiple mounting options.
Designed for use with the Xbox Adaptive Controller, this joystick can be used for either hand and features a wide range of mounting options. The joystick is plug-and-play compatible out of the box but also configurable with free programming software. Backlighting behind the keys features adjustable levels in blue, red, or a mix of the two.
|Operating System||Configured to plug directly into the Xbox Adaptive Controller. May be used as a USB Joystick on any OS with USB HID support.|
|Free Programming Software||Windows: Device may be re-configured using MacroWorks 3.1|
|Emulation Modes||HID keyboard, HID mouse, HID game controller|
|Joystick||MDMTM precision 3 axis (twist for Z)|
|Switch Types||Full-travel rubber dome, carbon on gold contacts, guaranteed for over 1 million operations|
|Number of Keys||4 single and 4 1x2 keys + programming button|
|Actuation Force||Approx. 2.5 oz (72g) break-over, approx. 1.5 oz (42g) hold|
|Keycaps||0.625” (16mm) sq.; relegendable with Cherry MX compatible stem|
|Key Spacing||0.75" O.C.|
|Backlighting||1 blue and 1 red addressable LED under each key|
|Connector||Wired USB standard “A” plug|
|Cord Length||118” (3m)|
|Dimensions||5.8” x 3.8” x 3.5” (147mm x 97mm x 89mm)|
|Weight||19.2 oz. (544 g)|
|USB Type||USB 1.1 compatible through 3.0 Type-c with adapter|
|Power Source||USB port, nominal voltage = 5 VDC|
|Current Draw||NO backlight: 18 mA, Blue backlight full: 38 mA, Red backlight full: 57 mA, All backlights: 75 mA|
|Temperature Range||-20 to 60 C|
|Memory Capacity||Approximately 950 keystrokes or commands in onboard memory|
|Memory Type||EEPROM, non-volatile memory (X-keys retains memory for over 200 years)|
|Environmental Rating||IP 40, typical indoor office environment|
|Certifications||FCC class B, CE, RoHS, WEEE compliant|
Download PDF: XK-12 Joystick DD.pdf
Sketchup 3D Model
We offer this Sketchup model as a 3D rendering of the XK-12 Joystick for viewing or planning purposes. Dimensions and details of the model, while reasonably accurate, should not be used for critical specifications.
Includes two brackets and Modular HoseTM connectors
One mounting plate with screws to attach an X-keys.
Extend your X-keys up to 150 feet via CAT 5 or equivalent network cable.
Protect your X-keys while traveling with this custom road case from MyCaseBuilder.
Give your X-keys a 45 degree angle lift with this Tilt Stand that attaches to the back of the unit.